BUY New & Used 200 kw Industrial Generators 200 kW GENERATORS FOR SALE

200 kW Generators Capable of Powering Factories, Large Buildings, Temporary Sites, and More

Backup power for businesses, factories and hospitals is the main job of a 200 kW generator. It also supplies emergency power for large conventions, large lighting systems, pumps, heating and cooling systems, and temporary power on construction sites.

A Popular Size in Cummins and Caterpillar’s Mid-Range Lineup

200 kW sits right in the sweet spot where Cummins and Caterpillar both offer some of their most commonly deployed mid-range models. It’s a size with strong parts availability and service network support precisely because so many facilities land here — enough capacity for serious commercial and light industrial use, without the specialized ordering and lead times that come with the largest units in either brand’s catalog.

Examining Power Demand to Select 200 kW

At 200 kW, motor starting often drives the choice more than running load does. Identify the largest motor and how it starts (across the line, soft start or variable frequency drive), since the start method changes the surge the generator has to absorb. Our power calculator is a useful first step, and an engineer can verify the start method against the generator’s alternator. For output amperage, our amperage chart lists a 200 kW generator (3 phase, 80% power factor, 250 kVA) at 694 A at 208V and 301 A at 480V.

Fuel Tank Runtime and Gas Rate for 200 kW Sets

Generac’s diesel SD200 and gas SG200 share a 200 kW standby rating and the same 301 A at 480V, so at this size the decision comes down to where the fuel comes from.

• Diesel: For a 200 kW unit, our diesel fuel consumption chart shows 4.7, 7.7, 11, and 14.4 gal/hr across 1/4, 1/2, 3/4, and full load, which are estimates. The SD200, an 8.7 L engine rated 180 kW prime, lists 4.4, 8.3, 11.9, and 14.8 gal/hr at standby. Its tank options give runtimes of 10, 25, 40, 47, 64, or 90 hours at standby rated output.
• Natural gas: The chart is for diesel only. The SG200 runs on a 14.2 L engine and lists 1,440 scfh at half load and 2,460 scfh at full standby load. At its 180 kW prime rating the figures are 1,320 and 2,280 scfh. Supply pressure is 7 to 11 inches of water column.

Shop diesel and natural gas separately; the fuel is noted on every listing.

Frequency Ratings and Trailer Weight for a 200 kW Mobile Unit

Towable 200 kW sets list different ratings for 50 Hz and 60 Hz, so check the frequency before comparing. Atlas Copco’s QAS 200 JD T4F is rated 160 kW prime and 176 kW standby at 60 Hz, and 131 kW prime and 144 kW standby at 50 Hz. At 60 Hz it burns 4.6, 6.4, 8.2, and 10.9 gal/hr from 1/4 to full load and runs 36.6 hours at 75% load on a 335-gallon tank. The trailer-mounted unit weighs 11,062 lb with fluids, measures 203 x 87 x 98 inches, and lists a 500 A main breaker and 71 dB(A) at 23 ft at 75% load. Its John Deere 6068HFG05 engine is certified to Tier 4 Final. Confirm hitch, brakes, and towing rules for the exact unit. Towable units are listed with our trailer-mounted generators.

50 Hz or 60 Hz: Rating and Tank Effects on a 200 kW Quote

The price of a 200 kW generator depends on the following:

• New or used: Compare new generators with used generators: a used set and a new one are priced on different terms.
• Hours and age: Run time on the meter and the year of manufacture both shift what a used 200 kW set costs.
• Frequency and rating: A towable such as the QAS 200 JD T4F carries different ratings at 50 Hz and 60 Hz, and Generac lists the SD200 and SG200 at 200 kW standby and 180 kW prime.
• Engine: Generac’s diesel SD200 uses an 8.7 L engine and its gas SG200 a 14.2 L engine.
• Fuel tank and runtime: The SD200 lists six runtime options from 10 to 90 hours, and tank size affects both runtime and cost.
• Mounting and delivery: A skid-mounted set and a trailer-mounted set of the same size differ in weight and footprint, and delivery distance adds to the total.

Found a 200 kW set that fits? Contact us and we will quote it.

Critical Operations and Data Centers on 200 kW Backup

A 200 kW set is commonly paired with a transfer switch in buildings where an outage of even a few minutes costs product, data or safety. Its job is to keep those circuits energized until the utility returns.

Single Building or Full Commercial Complex at 200 kW

A single building with lighter demand often finds our 175 kW generator enough. Hotels and multi-building campuses frequently move up to our 250 kW generator for margin as demand grows.

Technician-Checked 200 kW Generators

Selection and testing define how we sell 200 kW generators. New or used, each unit is put through a 22-point assessment and carries the 30-day IronClad warranty. Our service and maintenance team supports it after sale. Visit the inventory or reach out with any questions.

Matching a Commercial Generator to Your Site

Our range runs from 40 kW generators, which suit retail shops, small offices and light industrial equipment, up to the largest units. Compact sets like these maintain essential functions during outages or act as primary power for temporary setups. On the other end of the spectrum, our 2,500 kW generators are engineered for large-scale industrial applications, offering enough power to support major manufacturing plants, large hospitals, or entire commercial complexes. With this wide range of options, Turnkey Industries ensures you find the perfect fit for your specific requirements. Our experienced team is ready to guide you through the selection process, providing expert advice and ensuring you have the right generator for your needs.