Shop New & used Commercial Standby Generators 60 kW GENERATORS FOR SALE

60 kW Generators for Production Equipment, Commercial Buildings, and More

Motors, pumps and compressors are typical 60 kW loads, and sets of this size often work on production floors and in processing facilities where machines run continuously rather than in short bursts. Lighting, computers and air conditioning can share the same generator.

Built for Continuous-Duty Operations

Standby power and continuous-duty power aren’t the same challenge. A generator backing up occasional outages only needs to handle a burst of demand; a generator running production equipment for extended shifts needs to sustain that load hour after hour without derating. 60 kW is a common size for manufacturing lines, processing plants, and facilities that treat the generator as primary power rather than a backup — where reliability under sustained load matters more than peak burst capacity.

Concurrent Loads and Duty Cycle at 60 kW

Sizing a 60 kW industrial generator starts with identifying every load that runs concurrently, then accounting for both starting and running wattage. Distinguish between resistive and inductive loads, since motor-driven equipment behaves differently under startup than steady-state lighting or heating elements. Duty cycle matters just as much as total wattage here — a generator sized for occasional backup won’t hold up the same way under continuous industrial use.

Factors That Affect Real-World Sizing

• Concurrent electrical loads, including starting and running wattage
• Resistive vs. inductive load types
• Duty cycle — continuous production use vs. intermittent backup
• Environmental factors like temperature and altitude
• Planned expansion or additional equipment down the line

Continuous production use changes the sizing, so check your totals in our power calculator or talk it through with our sales team. For output amperage, our amperage chart lists a 60 kW generator (3 phase, 80% power factor, 75 kVA) at 208 A at 208V, 198 A at 220V, 181 A at 240V, 91 A at 480V, 71 A at 600V, and 10.5 A at 4160V.

Cummins C60D6R and Kohler KG60: Fuel Numbers at 60 kW

A 60 kW set that runs long hours uses fuel steadily, so plan the duty rating and the fuel supply together.

• Diesel: The 60 kW row of our diesel fuel consumption chart reads 1.8 gal/hr at 1/4 load, 2.9 at 1/2, 3.8 at 3/4, and 4.8 at full load. Maker sheets split standby from prime: Cummins’ C60D6R data sheet shows 5.0 gph at full standby load (60 kW) and 4.6 gph at full prime load (55 kW).
• Natural gas: Kohler’s KG60 lists 292 cfh at 25% load, 533 at 50%, 770 at 75%, and 975 at 100% on its standby rating, with a natural gas supply pressure of 5 to 11 inches of water column. The sheet publishes standby ratings only and refers continuous-rating questions to the factory. Do not use the diesel chart for gas units.

Looking for one fuel only? Go straight to diesel units or gas units.

Prime-Load Runtime and DEF on a Towable 60 kW Set

For a towable set that will run day after day, read the runtime figures the maker prints at prime load. Wacker Neuson’s G70, with a Kohler engine, lists 6.7 gph at prime load. Its printed runtimes are 25.2 hours at prime load, 32 hours at 75% of prime, and 47.1 hours at 50% of prime. The engine also uses DEF: the tank holds 41 pints, with a printed 49.2 hours of DEF at prime load, so plan fuel and DEF top-ups on the shorter of the two. For moving it, Wacker Neuson gives a shipping weight of 4,640.7 lb with the trailer (3,869.1 lb without) and trailer shipping dimensions of 160 x 67.5 x 85.1 inches. See what is on wheels now in trailer-mounted generators.

Prime Versus Standby on a 60 kW Quote

A 60 kW price is built from a handful of choices.

• Prime versus standby: Cummins rates the C60D6R at 60 kW standby and 55 kW prime. Its prime rating covers varying load for unlimited hours, with ten percent overload available; its standby rating covers the length of a utility outage. Size a set bought for daily running on its prime figure.
• Which ratings are published: some gas sets, including Kohler’s KG60, publish standby ratings only, with no overload capability, and send continuous-rating requests to the factory.
• Current at your voltage: Kohler’s KG60 sheet shows 91 A at 277/480V, the same figure as the 60 kW row on our amperage chart. Check your total with our power calculators.
• Emissions equipment: a set like the G70 needs DEF on top of diesel, which adds a fluid to stock and a system to service.
• New or pre-owned: new generators and used generators are listed separately; for continuous duty, look closely at hours on any used unit.
• Enclosure, mounting, and freight: each changes the delivered total.

Want a price on a 60 kW unit? Contact us and we will respond.

Single-Line Production Versus Expansion Plans at 60 kW

Sixty kW covers most single-line production setups and mixed-equipment commercial sites. A facility mixing one major machine with smaller draws can drop to our 55 kW generator; multiple production lines or equipment expansion on the way justify our 70 kW generator or 100 kW generator before the unit is outgrown.

Inventory and Contact Options for 60 kW Buyers

Inspection comes first at Turnkey Industries: each 60 kW generator we sell is inspected and certified by a technician, and the 30-day IronClad warranty follows the unit to your site. After that, the service and maintenance team takes over preventative care and repairs. Our decade of experience is on display in the full inventory, and questions are welcome.